12000 lumens Laser Projector 3D Mapping Projector large Scale outdoor building Projection
Product Description
Ultimate Performance and Versatility for Large Public Venues
SMX Large Venue Projectors feature ultra-high brightness from Laser and dual-lamp light sources, superb image quality, and enduring performance for mass public spaces, with powerful installation flexibility for museums, stages, and gala events.
· Ultra-High Brightness from 5000-15,000 ANSI Lumens
· Enduring Reliability from Laser and Dual Lamp Technology
· 360° and Portrait Projection Accommodate Nonstandard Spaces
· Optional Lenses for Diverse Applications
Laser Projector MX-X120U not only pumps out up to 20,000 lumens but also boasts sealed optics and a laser light engine that can mean a long and maintenance-free life.
Connections:
* DisplayPort Version 1.3
* HDMI 2.0 (x2) with HDCP 2.2
* Computer RGB in (x2, 15-pin D-Sub)
* RS-232C Serial Port
* USB (Type A, for accessory power, mouse, service)
* Wired LAN (RJ-45)
* HD Base T In (RJ-45)
* HD Base T Out (RJ-45)
* Audio in (3.5 mm)
* Audio out (3.5mm)
* 3D Synchronization (mini DIN 3 pin)
* Remote Control extension (3.5mm)
Specifications
| Main Spec | Projector Type | Liquid Crystal Display 3x0.76"WUXGA | |
| Chip Size | 3*0.76' | ||
| Native Resolution | WUXGA (1920×1200) | ||
| Brightness | 12,000 Lumens | ||
| Uniformity | 90% | ||
| Contrast | 100000:1 | ||
| Native Resolution | Wuxga (1920×1200) | ||
| Edge Blending | 3D Mapping | ||
| 4K | Support | ||
| Aspect Ratio | 16:10:Native / 4:3 Compatible | ||
| Light Source | Type | Laser Technology | |
| Life | Standard :20000 hours Eco Mode:25000hours | ||
| projector lens | Projector Lens | 1.3-3.02:1/2.3x (20000) | |
| Throw Ratio | (0.36~5.50) | ||
| Optional Lens | Available | ||
| Keystone Correction | H | ±50° | |
| V | ±30° | ||
| Projection Method | Ceiling,Front,Rear | ||
| Input | DVI-Dx1 | ||
| HDMI 1.4(SupportHDCP*3)x1 | |||
| 15-pin Mini-Dsubx1 | |||
| HDBaseT*4x1 | |||
| Wired Remote x1 3.5mm | |||
| RJ45×1(LAN Control) | |||
| RS232(D-sub 9pin)x1 | |||
| USB-A*1 (5V/1.5A) USB-B *1 | |||
| 3G-SD *1 (Option) | |||
| Output | 15-pin Mini-Dsubx1 | ||
| HDMI 1.4(Support HDCP*3) OUTx1 | |||
| 3D-Sync x1 | |||
| Power Input( Voltage&Frequency) | 100-240V AC±10%,50/60Hz | ||
| Power Consumption | Normal:850W,ECO:750W | ||
| Case Material | Molded Plastic | ||
| Standby Power Consumption | <0.5W | ||
| Dimension DxWxH | 600*218*503mm | ||
| Net Weight | About 28.5 kg | ||
| Noice | Normal:35dB ECO:33dB | ||
| Working Temperature*5 | High Altitude | 0m-2500m(>1500m Using High Altitude Mode) | |
| Temperature | 5-40ºC, | ||
| Humidity | 10%-85% | ||
| Accessories | AAA Battery ×2,Remote Control ×1,Power Cable×1,VGACable ×1,CD-ROM(User Manual)×1, Quick installation manual, warranty card, Lens cover | ||
Optional Projector Lens
Remove the lens
1. Turn on the projector to display the image.
2. Hold LENS RELEASE button for more than 2 seconds.
The lens position will be moved to the original position.
3. Turn off the main power switch and unplug the power cord.
4. Wait until the projector chassis is cooled enough to handle.
5. When the release button at the bottom of the lens mount on the front panel of the projector is fully pressed, turn the lens counterclockwise.
* Lens release
before storing the lens.
* If no lens is about to be installed on the
projector, please install the dust cover attached
to the projector.
* Do not touch or remove any other component except the lens and parts related to it.
Otherwise, you may experience product failure, electric shock, fire, or other incidents.
* Make sure model of the lens is compatible with your projector before installing it.
* When replacing the optional lenses, it must be done by a professional.During the replacement process, pay attention to mechanical damage and thermal burns of the lens.
* For details on lens and its installation, please call local dealers.
* Be careful in removing the lens. Do not drop it.
* When replacing the optional lens, just for safety reasons, please be sure to cut off power to avoid electric shock fire and other safety accidents.